curtain curtains hang rings drapery tape pleater ehow drapes pins rod clips using hooks hanging pinch pocket draperies pleated hide

traversing draperies are installed on a specific carrier, the part installed in the track. So all ripplefold draperies are installed in traversing tracks however there are decorative rods with the carriers and heavy duty tracks without a fascia, finial etc.

rod traverse hardware planitdiy

hanging your pinch pleated draperies at the master slide carrier on your traverse rod. This master slide carrier is usually the large carrier on the right side, as your facing the drapery. The first drapery hook will be inserted behind the arm of the master carrier (see illustration). Step 3.

restring rod traverse drapery curtains curtain rods drapes window blinds repair

Look for Heading Tape. Turn the curtain panel inside out and check for the …Measure the Space. Measure the space from the wall to the front of the …Mark for Pin Placement. Indicate pin placement marks along the top of the …Stitch Pin Pockets. Stitch 1 1/2 inches, from the top of the panel toward the …Add the Drapery Pins. Insert the sharpened end of the drapery pin, just above …Hang the Drapes. Hang the drapes by inserting the pins through the carriers …See full list on

rod draw center restring curtain traverse way repair curtains drapes window blinds enlarge seen

sidelights

interiordecorating

curtain track triple bendable mount tracks valance bay window ceiling rods length above ivory curtains inch single bracket metal move

rod curtain rods drapery traverse stationary panels kirsch hardware valances

drapes pleat chadmade 120w

blinds vertical window living treatments drapes mid century without curtains mockup gum golly doors something obviously sets

19, 2021 · The standard distance from the window casing to the end of the curtain rod (excluding finials) on each side of the window should be four to 10 inches. As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame.

traverse rod hang drapery

to view on Bing9:44Sep 21, 2015 · A must watch for beginners! This video explains traverse rod basics, drapery fullness and yardage : Scott WeaverViews: 68K

rods traverse decorative drapery decor rod wrought iron interior wood styles

hang drapery draperies close pleat panels hung

hang pleated draperies

a drapery pin into the seam so the bottom edge of the pin aligns to the pin mark and hook the pin into the carrier of the traverse rod. Insert pins, at the same distance from the top edge ...

pinch pleat curtains curtain drapery drapes pleats fabric pleated rings hang silk heading luxury rod clips making sheers panel windows

to Hang Pinch-Pleated Drapes on a Traverse Rod. Step 1. Lay the drapery panel on a flat surface, right-side down. Grasp the S-shaped drapery pin in one hand and the header of the panel in the other. Step 2. Step 3. Step 4. Hanging the Drapes.

01, 2013 · This video explains how to properly hang a traverse rod, and allowing for drapery stack back as well as mounting and adjusting the control cords.

: Fern Fischer Unfold the drapes and open out the top edge with the pleats. The top edge, or header, is …Lay a drapery hook on the back of a pleat and position it so the top of the hook is the desired …Insert the point of the hook pin into the back of the pleat, directly under the pleat seam at the …Measure and mark the same distance on the back of each pleat and insert a hook at each …Measure in from the side edge of the header about 1/2 inch, then measure down the …Insert the hooks through the carriers on a traverse rod, or through the small eyes on the …See full list on